Portable Ultrasonic Hardness Tester NDT Instrument High Accurate Precision Measuring

1. Functional Characteristics

• Main hardness scale: HV

Convertible hardness scale: HRC, HRA, HRB, HBW

• In multi-points calibration mode, any hardness scales can be chosen.
• Testing range: HV50~1599, HRC20~68, HB85~650

• Test direction:Support 360° test, as long as the angle between the indenter and the surface doesn’t exceed 90° ± 3°.
• Battery: 3.6V, 3000mAh lithium battery
• Endurance: 10 hours
• Test data can be exported to computer terminal.
• Norms: DIN 50159-1-2008; ASTM-A1038-2005; JB/T 9377-2010; JJG-654-2013;JJF 1436-2013.
• High accuracy----±4%HV, ±4%HB, ±1.5HR.
• Tiny test indentation---- requires a high-power microscope to see.
• Little damage to the workpiece.
• High test speed----output test results in 1s at the soonest.
• New appearance design, innovative sculpt, convenient to hold and good craft.
• Full English display, menu-type operation, few keys, simple and convenient to operate.
• 3.5 inches large LCD screen with 320×480 color graphics dot matrix, beautiful font and graphics, rich information and clear display.
• Directly display the current measured value, cumulative measured value, maximum value, minimum value, average value and conversion value.
• 50 sets of data storage.
• Simple calibration----5 sets of one-blockcalibration data, 1 set of default calibration data and 5 sets of multi-blocksscalibration data can be stored in the host.
• For materials with different elastic constants, just anone-block calibration is required to adapt to the new material.
• For unknown material or material without conversion table, the hardness scale can be arbitrarily selected for multi-points calibration to eliminate the systematic error brought by the conversion table.

• Easy to test on assembly line.

2.Accuracy

3.Application

• Hardness test of flange edge and gear root stamping parts, mold, thin plate, face-hardened gear tooth, gear groove and taper part
• Hardness test of axle and thin-wall pipes and vessels
• Hardness test of wheels and turbine rotors
• Hardness test of bit edge
• Hardness test of welding parts
• Measure the depth of deep hole with certain aperture, concave and convexwith large radians, and irregular plane
• Hardness test of most ferrous and nonferrous metals and their alloys in industrial production
• Hardness test of thin coatings

• etc.

4. Workpiece Requirements for UCI method

Because ultrasonic hardness tester is a kind of Vickers hardness tester, the requirements of Vickers hardness tester are also met by ultrasonic hardness tester.

7.Packing List

Standard Delivery

• Host
• Manual probe (2kgf)
• Probe connection cable
• 5V ac power adapter
• USBcable
• Standard hardness workpiece
• Equipmentbox
• Operating manual
• Certificate
• Warranty card
• Packinglist

Optional Accessories

• Probe (1kgf, 3kgf, 5kgf, 10kgf)
• Operating platform

NDT Instrument Ultrasonic Hardness Tester

High Accurate Ultrasonic Hardness Tester

Portable Ultrasonic Hardness Tester

Portable Ultrasonic Hardness Tester NDT Instrument High Accurate Precision Measuring Images